- 2400mm (8 foot) internal height to horse area
- 1812 litres of Luton storage capacity
- 1400mm x 500mm Luton opening with lipped edge
- Cargo netting to secure Luton area storage
- Slide open viewing window from cab to horse area fitted with ‘toughened glass’
- EVA toughened stock board matting to 5 foot at rear of the horse
- EVA toughened stock board matting angled from 5’ to 4’ on the side wall
- Reinforced ‘pawing’ area at the horses front feet made from polycarbonate stock board sections to prevent horse floor damage and help to avoid pulled shoes
- Removable multi-grip rubber safety mats on the horse floor
- Sealed drainage holes situated under all floor matting
- Jet wash cleaning approved
- Polished stainless steel inner frame to ramp opening with round edged strut holders
- Lockable compression latches on ramp top door
- Toughened leather pull strap on the top door
- 320 x 360 mm roof ventilator with removable fly netting
- 500 x 600mm black framed sliding windows at either side of horses heads fitted with toughened glass and tinted for UV protection
- Polished stainless steel window bars to protect windows
- 4 stainless steel tie rings ( 2 each side)
- LED white and red lighting with main switch and individual touch on/off capability
- Alexanders Swan Neck Partition, featuring;
i) Polished 50mm tubular lightweight stainless steel main frame
ii) ‘Alexanders’ 2015 ‘swan neck’ design
iii) 4 point fixing into floor, bulkhead and roof strut
iv) Anti-rattle fastening bolts at each fixing point
v) 4 Toughened leather loop handles on each fastening bolt
vi) Solid 12mm GRP centre panel
vii) 30mm thick high impact, closed cell waterproof foam padding on both sides of centre panel, shaped to follow the swan neck contours and covered in marine quality black vinyl.
viii) 360mm clear PVC lower ‘anti-kick’ skirt secured with flush fitting stainless steel bolts
ix) Safety latch for securing partition in loading position in high winds
